Behringer Sound Cards & Media Devices Driver
.png/220px-KL_Creative_Labs_Soundblaster_Live_Value_CT4670_(cropped_and_transparent).png "Behringer sound cards & media devices drivers")
Behringer Sound Cards & Media Devices Drivers
Ok so it looks like your sound card has just standard 1/4' inputs. What you do is just hook your stereo RCA ends to the tape out on the mixer, and then plug the 1/4' end into the line in on the sound card. Note: line in is stereo, and mic is mono. 33-48 of 88 results for 'behringer sound card'. DJ Sound Controller Interface with USB Soundcard for PC Recording, XLR and 3.5mm Microphone Jack, 18V Power, RCA.
Hello,
The microphone input/the ability to record using the microphone at all with an integrated RealTek sound card in a Gateway pc appears to not be working - possibly due to some signal damage.
I needed a decent sound card, so I now just purchased a Santa Cruz sound card made by Turtle Beach.
http://www.turtlebeach.com/site/products/soundcards/santacruz/producthome.asp
I don't want to damage this new card and would like to know the correct way to set this up for use with Cakewalk Home Studio 2 and my Behringer Eurorack UB802 mixer/preamp.
http://www.behringer.com/UB802/index.cfm?lang=ENG
The input and output on the RealTek still work, but, if possible - I would like to disable it and use the Santa Cruz as the primary sound card.
How do I 'disable' the onboard RealTek card?
Listed below are the cables I have; My main question here is: What is the correct way to set this up, using the cables I have and any other cables/adapters not listed?
If I need something else, please let me know. I would really appreciate any input on this. Thanks...ALOT.
All of the cables have male connectors.
The (parentheses) represent the number of connectors on each end.
The dotted lines '-------' represent the cable in between the two ends.
(2) Left and right 1/4'------------------(2) left and right RCA
(2) Left and right 1/4'------------------(1) stereo 1/4'
(2) left and right RCA-------------------(1) stereo 1/8'
(1) stereo 1/8'-------------(1) stereo 1/8'
(1) mono 1/4'--------------(1) mono 1/4'
3 different cables:
(2) left and right RCA-------------------(2) left and right RCA
Also:
1/8' to 1/4' adapters
1/4' to 1/8' adapters
The microphone input/the ability to record using the microphone at all with an integrated RealTek sound card in a Gateway pc appears to not be working - possibly due to some signal damage.
I needed a decent sound card, so I now just purchased a Santa Cruz sound card made by Turtle Beach.
http://www.turtlebeach.com/site/products/soundcards/santacruz/producthome.asp
I don't want to damage this new card and would like to know the correct way to set this up for use with Cakewalk Home Studio 2 and my Behringer Eurorack UB802 mixer/preamp.
http://www.behringer.com/UB802/index.cfm?lang=ENG
The input and output on the RealTek still work, but, if possible - I would like to disable it and use the Santa Cruz as the primary sound card.
How do I 'disable' the onboard RealTek card?
Listed below are the cables I have; My main question here is: What is the correct way to set this up, using the cables I have and any other cables/adapters not listed?
If I need something else, please let me know. I would really appreciate any input on this. Thanks...ALOT.
All of the cables have male connectors.
The (parentheses) represent the number of connectors on each end.
The dotted lines '-------' represent the cable in between the two ends.
(2) Left and right 1/4'------------------(2) left and right RCA
(2) Left and right 1/4'------------------(1) stereo 1/4'
(2) left and right RCA-------------------(1) stereo 1/8'
(1) stereo 1/8'-------------(1) stereo 1/8'
(1) mono 1/4'--------------(1) mono 1/4'
3 different cables:
(2) left and right RCA-------------------(2) left and right RCA
Also:
1/8' to 1/4' adapters
1/4' to 1/8' adapters